香蕉视频色在线观看,国产精品亚洲欧美日韩

F-615電極

FermProbe^® pH Electrodes: T-Pull^® and Standard Electrode Styles

Specifications
Ordering Information

The T-Pull^® and standard style FermProbe pH electrodes are designed to be used in bioprocess applications where CIP/SIP procedures are used. Built to withstａnd repeated steam sterilization cycles, the FermProbe quickly stabilizes after steam exposure to be back on-line in half the time of other electrodes. This rugged, low impedance, process pH electrode continues to provide fast and precise pH measurements even after harsh use and prolonged steam exposure.

The FermProbe design specifies that the pH electrode be secured to the housing by a free-spinning threaded retainer nut. This allows the electrode to be installed or removed from the housing without twisting or disconnecting the electrode cable.

T-Pull^® Handle FermProbe pH Electrodes
The T-Pull handle eases installation and removal of the electrode from the housing. The electrode can be easily removed from the housing without being rotated or twisting the cable. This greatly reduces cable fatigue.
Features:
• Rugged handle design eases removal of electrode from housing. No tools required.
• Greatly reduces cable fatigue.
• Electrode retainer nut is part of the handle. Cannot be lost or misplaced.
• Available with disconnect cap or integral cable.

Model F-615

Model F-607

Standard FermProbe pH Electrodes
This FermProbe style is designed for economy while still retaining all performance specifications. This electrode is secured into the housing with a reusable electrode retainer nut. All housings are shipped with a reusable electrode retainer nut to be used with this style of FermProbe.

Features:
• Most economical, cost effective design.
• Secures to housing with reusable retainer nut.
• Rubber strain relief minimizes cable fatigue.
• Available only with integral cable.

Model F-600

How to Order an Electrode

(1) Choose Electrode Model.
If the electrode needs a disconnect cap, use Model F-615. If the electrode needs an integral cable for extra protection in a washdown area, use Model F-607 or F-600.

(2) Choose Electrode Length.
If you have already chosen a housing, select an electrode length with the same Class designation as the housing. The housing ordering information box also lists the correct electrode length to order. If you have not already chosen the housing, please review the recommendations next to each electrode model below.

(3) Confirm Cable Length and Connector.
Model F-615 pH electrodes require a disconnect cable and connector assembly.

Model F-600 and F-607 pH electrodes come with 6 ft (2 m) cable and BNC connector. If you need a different cable length or connector, please call the Sales Department for more information.

SPECIFICATIONS

FermProbe pH Electrode Specifications:
• 0 - 13 pH range
• Steam sterilizable to 135° C
• 150 psig max. pressure
• Double junction, Ag-AgCl reference system
• Electrode secures to housing with threaded retainer nut