IP20 protection grade test B anti-shock test finger bending
IEC61032 Diameter 12MM household appliances Anti-shock test finger bending IP protection grade test B
First, basic introduction
1. It is made according to GB4706.1, GB2099.1 and relevant IEC61032, UL and other relevant provisions.
2. Test finger bend is a necessary instrument for electric shock protection test of household and similar problems.
IEC61032 Diameter 12MM household appliances Anti-shock test finger bending IP protection grade test B
Ii. Technical parameters:
IEC61032 Diameter 12MM household appliances Anti-shock test finger bending IP protection grade test B
Three, the use of methods
The joint part of the standard test finger should not reach live parts or dangerous parts, and the 50mm-20mm baffle should not enter.
In the test requirement of preventing access to dangerous parts, the type B test probe shall have 30±3 N thrust. General use with push tension meter.
In the anti-shock test, need to connect and configure the power supply, light bulb device.
5. Precautions: The test probe is a precision stainless steel product. Handle with care and pay attention to maintenance.
Iv. Drawings:
IEC61032 Diameter 12MM household appliances Anti-shock test finger bending IP protection grade test B
Three, the use of methods
The joint part of the standard test finger should not reach live parts or dangerous parts, and the 50mm-20mm baffle should not enter.
In the test requirement of preventing access to dangerous parts, the type B test probe shall have 30±3 N thrust. General use with push tension meter.
In the anti-shock test, need to connect and configure the power supply, light bulb device.
5. Precautions: The test probe is a precision stainless steel product. Handle with care and pay attention to maintenance.
所有評論僅代表網(wǎng)友意見，與本站立場無關(guān)。