LR-C005 100KN Universal Testing Machine
1.The project profile:
Domestic microcomputer control electronic universal testing machine started in the early 90 s, in order to improve the skill level of the enterprise products, the company has introduced foreign advanced technology, make the company’s product technical level onto a new stage.
LR-C005 100KN Universal Testing Machine
2.Use areas:
The products are widely used in metal, non-metallic materials, mechanical properties such as pressure and bending shear test.With a wide variety of affix, can also be used for material and components of mechanical properties test.In the specimen deformation is large, fast test of rope, belt, silk, rubber, plastics, and other areas of the material test, also have a very broad application prospects.Suitable for quality supervision, teaching, scientific research, aerospace, steel, metallurgy, automobile, construction materials, and other areas of the test.
3. According to the standard:
Meet the national standard GB/T228.1-2010 “metallic materials tensile testing at”, GB/T7314-2005 “metal compression test method” requirement, in line with the GB, ISO, ASTM, DIN, and other standard data processing.Can accord with the requirement of users and provide standard.
LR-C005 100KN Universal Testing Machine
4.The key description:
1. Host: this machine adopts double space door structure, upper space stretch, lower space compression, bending.The beams rise and fall without grade.The transmission part adopts the arc synchronous toothed belt, the screw side drive, the transmission is stable, the noise is low.The specially designed synchronous toothed belt deceleration system and the precision ball screw pair drive the moving beam movement of the testing machine to realize the no-gap transmission.
- Supported by:
Standard configuration: wedge stretching fixture and compression fixture.
- Electrical measurement and control system:
(1) using ac servo system and servo motor, the performance is stable and reliable, with the protection device of overflow, overpressure, overspeed and overload.
(2) it has the protection function of overload, overcurrent, overpressure, displacement upper and lower limit and emergency stop.
(3) the internal controller ensures that the test machine can realize the control of beam displacement and other parameters, which can realize the equal velocity displacement.
(4) at the end of the test, the initial position of the test can be returned manually or automatically.
(5) to achieve the real physical zero, gain adjustment and test force measurement of automatic gear shifting, zero, calibration and inventory, and without any simulation adjustment link, highly integrated control circuit.
(6) the electrical control line is based on the international standard, which conforms to the electric standard of the national testing machine and strong anti-interference ability, which guarantees the stability of the controller and the accuracy of the experimental data.
(7) with network interface, data transmission, storage, printing record and network transmission can be carried out, which can be connected with Intranet or Internet network.
- Description of main functions of software
The measurement and control software is used for microcomputer control electronic universal testing machine for all kinds of metal and nonmetal (such as, man-made board, etc.) test, in accordance with the corresponding standards to complete real-time measurement and display, real-time control, and a variety of functions such as data processing and result output.
(1) the rights management, the operators of different levels have different operating authority, actionable menu, etc are also different, even ordinary operator operation is simple, convenient, fast, and effective protection system;
(2) real-time measurement and display test force and peak, displacement, deformation and other signals;The real-time acquisition and control of NT mode platform of Win2000 and WinXP are realized.Accurate timing and high-speed sampling are realized.
(3) the real-time display of various test curves such as load-deformation, load-displacement and other test curves can be switched on at any time, and the amplification and reduction of the curve are very convenient;
(4) parameters of computer storage, set, load, and zero and calibration operations from the software, the parameters can be convenient for storage and transfer into, so that a host with multiple sensors can easily switch, and there is no limit to the number of;
(5) support uniform velocity displacement control mode;The standard reference curve is given in the process of debugging parameters of senior operators, so that the effect of each parameter on the effect can be observed.
(6) analyze data by man-machine interaction.Processing methods widely used meet the GB/T 228-2010 metal material room temperature tensile test method “requirement, can be automatically calculated elastic modulus, yield strength, extension strength and other performance parameters, can also be artificial intervention analysis process, improve the accuracy of analysis;Other data processing can be performed according to the standard provided by the user.
(7) test data to a text file storage, to facilitate the user query, and the use of any general commercial reports, word processing software then made on the test data processing, convenient transfer data network at the same time;
(8) the data curve can be recorded and saved in the whole process, and it has the demonstration function to realize the test curve.It can also be compared with the curve superposition, which makes it easier to compare and analyze.
(9) the test report can be printed according to the user’s requirement format.The user can select the report and output basic information and test results and the content of the test curve to meet all the needs.
(10) realize the digital zero and automatic calibration of the test force and deformation, which facilitates the operation and improves the reliability of the machine.Various parameter system Settings are stored in the file format for easy preservation and recovery.
(11) can be used in Win98, Win2000, WinXP and other operating systems.The control of test process, change of beam movement speed, parameter input and other operation can be completed with keyboard and mouse.
(12) it can automatically identify and support external point movement control, so that it is convenient to install the sample.
(13) it has overload protection automatic stop function, and can automatically judge the sample fracture and automatic stop.Depending on the user’s requirements, the above software functions will be added or changed.
5.Specification
| Max Test Force（kN） | 100 |
| Accuracy | 1Level |
| Max force test range | 2%-99% |
| Test force relative error value | ＜±1% |
| Load display resolution | Max force 1/300000 |
| Distortion measuring range | 2%-99% |
| Deformation relative error value | ＜±1% |
| deformation of resolution | maximum deformation 1/300000 |
| Displacement relative error value | ＜±1% |
| displacement resolution(mm) | 0.001 |
| Speed range | 0.01mm/min ~ 500mm/min |
| Tensile stroke（mm） | 650 |
| Compression space（mm） | 650 |
| Test width（mm） | 450 |
| Grips | Tensile, compression, bending, shear, peel, tear, etc |
| Overall dimension（mm） | 868*580*2050 |
| Servo motor power（kW） | 1 |
| Weight（kg） | 600 |
6.System configuration
| No | Item | The manufacturer and specifications | Qty | |
| 1 | Frame of host | 1set | ||
| 2 | deceleration system | synchronous belt | 1set | |
| 3 | ballscrew | 2set | ||
| 4 | Load cell | 100KN | 1pcs | |
| 7 | Software and control system | —– | 1set | |
| 8 | Random tools, random files | Instruction manual, installation manual, etc | 1set | |
| 9 | grips | 1. Wedge tensile grips | Flat jaw：0-7、7-14、14-21 Round Jaw：Φ4-9、Φ9-14、Φ14-20 | Can choose 2 pairs |
| 2. Compression fixtures | Compression diatmer：φ100mm | 1set | ||
所有評論僅代表網友意見，與本站立場無關。