IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
Test tool 31 is designed and manufactured to meet the requirements of IEC61032&GB16842 standard, mainly used to test whether the dangerous mechanical parts of the grinding system of the residual food processing device are touched.
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
How to use:
25mm probe shall not touch dangerous mechanical parts
During the test, 50N thrust may be applied, and the black baffle cannot fully enter the opening.
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger/
Meet the standard:
GB/T16842 Figure 14 test 31 and IEC61032 Figure 14 test 31, etc
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
Uses and Purposes:
To test whether hazardous mechanical parts of the milling system of the residual food handling unit have been touched
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
Sample range:
Easy to reach live parts of the housing or mechanical parts
| Name/model | Test rig 31/ HT-I14 |
| Probe diameter | Ф25±0.2 |
| Length of probe metal | 80±0.2 |
| Taper tip diameter | Ф60±0.2 |
| Taper tail diameter | Ф110±0.2 |
| Total length of the probe | 150±0.2 |
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
Test tool 31 is designed and manufactured to meet the requirements of IEC61032&GB16842 standard, mainly used to test whether the dangerous mechanical parts of the grinding system of the residual food processing device are touched.
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
How to use:
25mm probe shall not touch dangerous mechanical parts
During the test, 50N thrust may be applied, and the black baffle cannot fully enter the opening.
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger/
Meet the standard:
GB/T16842 Figure 14 test 31 and IEC61032 Figure 14 test 31, etc
所有評論僅代表網(wǎng)友意見，與本站立場無關(guān)。