欧美午夜福利精品一区二区,久久久久久精品免费看sss,性刺激特黄毛片免费视频

High speed 4000rpm-10000rpm PCR Micro medical centrifuge,Centrifugal machine,Laboratory centrifuge
Product Introduction:
Micro centrifuge is the use of centrifugal sedimentation principle, the solution of different density of particles for separation, concentration and purification. The special PCR head can be used for micro centrifugation, cell separation and rapid separation from the test tube wall. The machine consists of a main engine and accessories. The main engine is composed of chassis, drive system and control system.
Structure composition: usually composed of control system, centrifugal cavity, drive system, rotor, safety protection device.

High speed 4000rpm-10000rpm PCR Micro medical centrifuge,Centrifugal machine,Laboratory centrifuge
Features of the instrument
1. The centrifuge speed is high, the centrifuge effect is good, and the speed can be adjusted (4000rpm-10000rpm), easy to operate;

2. Adopt special shock absorption design, low operation noise;

3. Centrifugation time 0.5min-99min adjustable, wide range of adjustment;

4. Fully transparent top cover, humanized switch design, open the cover to stop;

5. Equipped with multiple rotors, suitable for 1.5ml, 0.5ml, 0.2ml and other centrifuge tubes, special rotor clip design;

6. With strong and durable design concept, the instrument has long service life;

7. The rotor can be easily installed and replaced. The composite rotor can be easily used in combination with various centrifuge tubes.

Rotor rotor	Preparation capacity combination mode
Rotor 1	8×1.5ml, 8×0.5ml (plus 0.5ml adapter) and other combinations
Rotor 2	0.5 ml x 8, 0.2 ml x 24, 0.2 ml * 8 x 4, 0.2 ml * 8 * 8 + 2 + 0.5 ml of 0.2 ml 8 and other combination methods

High speed 4000rpm-10000rpm PCR Micro medical centrifuge,Centrifugal machine,Laboratory centrifuge
Basic parameters

Model number	MC-10K
External dimensions	210×170×138 (mm)	Overall machine noise	≤70dB
Power supply specification	100-240VAC,50/60Hz,30 W	Relative deviation of speed	Centrifuge in the rated voltage, the maximum speed corresponding to the maximum load, speed relative deviation should be within ±2.5%.
Maximum rotational speed	10000(r/min)	Speed stability accuracy	Under the rated voltage, maximum speed and corresponding maximum load, the speed stability accuracy should be in Within ±1%.
Maximum preparation capacity	8 x 1.5 ml	Amplitude of amplitude	Centrifuge at the highest speed corresponding to the maximum load, the operation should be smooth, amplitude should not exceed 0.1mm.
Maximum centrifugal force	5000g	Temperature rise of test solution	The temperature rise of the test liquid in the centrifuge tube (bottle) should be ≤10oC when the maximum speed of the non-refrigerated low-speed centrifuge corresponds to the maximum load and the specified time is 20min.
Weight	1.30 kg	Time of rise and fall	Centrifuge speed up time ≤5min; Speed reduction time ≤7min.
Temperature rise from the ventricle	≤10oC	Electrical safety test	The general requirements for electrical safety of centrifuges shall comply with the provisions of GB 4793.1, and the special requirements for electrical safety of centrifuges shall comply with the provisions of GB 4793.7.